Water Proofing
WATERPROOFING SYSTEMS
Thermoplastic PVC roofing is extremely strong, as its heat welded seams form a permanent, watertight bond that is stronger than the membrane itself. PVC resin is modified with plasticizers and UV stabilizers, and reinforced with fiberglass non-woven mats or polyester woven scrims. They are inherently fire resistant and have a longer life than bitumen based membranes allowing for a 20 year warranty.
Bitumen based protection membranes that are ideal for use on roofs, reservoirs, basements, tunnels, car parks, and other areas. Due to its mechanical properties, it protects the underlying waterproofing system from sharply angled aggregates and other debris. The polyethylene sheet on both sides also enhances its protection properties.
A prefabricated self-adhering cold applied modified bituminous waterproofing membrane sheet available with
variety of different top layers and finishes to suit every intended application. The membrane is highly elastic but also reinforced with a fiberglass mesh and an easy release paper protects the adhesive side and allows for quick application.
Modified bitumen based membrane and one of the most
reliable waterproofing systems in the industry. Proven to be
durable, easy to maintain and to repair. Applied via propane
gas flame by trained and approved torch appliers.
A heavy duty protective coating for concrete, wood and metal
structure subjected to chemical attack. Approved for contact with
potable water and for food processing.
A spray-applied, two component, 100% solids, flexible,
rapid curing pure Polyuria system designed as a
waterproofing and protective coating. It combines the
advantages of seamless coating with very long life
cycles and high durability. The system offers excellent
surface properties and overall physical properties such
as anti-corrosion, waterproofing and protection for
concrete and steel in a wide range of environmental
conditions. Typical applications include: below ground,
bridge deck, tank, sewage, truck be, marine
environment, aquarium lining and refineries.
Modified bitumen based liquid membrane. Reinforced with
fiber mesh. Allowing applicators to enter into the crevasses
of wet areas and roof.
A Polymer modified cementitious waterproof mortar slurry
comprising of a liquid polymer and cement based mix
incorporating special admixtures. Interior and exterior
waterproofing and damp-proofing of concrete, cementations,
rendering, brickwork and block work.
Injection is used for the temporary water stopping of high
water intrusions in cracks, joints and cavities in concrete,
brickwork and natural stonework This process is a low
viscous, fast foaming and solvent-free water-reactive
polyurethane injection foam resin, which cures to a dense
flexible foam with a fine cellular structure.
WATERPROOFING FOR LANDSCAPING
A specialized membrane is used for waterproofing roof
gardens, planters, and greenery for the full protection
of structural/civil work. The system also conserves
irrigation when used under lawns and gardens. The
system contains high quality distilled bitumen and is
modified with Plastomeric & Elastomeric resins,
stabilizers, preventive chemicals, and antioxidants
which ensure excellent resistance to the atmosphere,
aging, and organic growth ultimately giving stability in
high temperatures and dampness.
Specifically designed for garden pond and lake applications. Its formulation and production process makes it compatible with aquatic life. PVC resin is modified with plasticizers and UV stabilizers and reinforced with fiberglass nonwoven mats or polyester woven scrims. Allows for a 20 year warranty.
THERMAL INSULATION
A layer which is proven to conserve energy, and is
made of a spray-applied insulating foam plastic that
is applied as a liquid and takes on the shape needed
in any form necessary. Formed by reacting the
compounds isocyanate & polyol, the final quality of
this layer relies mainly on the experience of the
applicator, the pureness of the chemicals, and the
condition/maintenance of the machine.
Exterior Insulation Finishing System[EIFS] is an insulated wall
cladding that provides a building with a blanket of continuous
insulation around the exterior of the building. EIFS works to
protect the exterior of the building against cold or hot
temperatures promoting a comfortable temperature inside the
building.
Insulation manufactured through a plastic extrusion process.
The resulting board is almost 100% closed cell, strong, highly
moisture resistant and easy to cut & lay giving accessibility to
the underlying roof for future changes and/or maintenance.
Processed foam concrete allows for a slope and a proven thermal
insulator with a lower weight to the surface area. Extremely safe
& highly recommended by engineers for use on roofs to avoid
excess structural load and to protect from drastic temperature
changes.
FINISHING & HIGH-END TERMINATION
An elastomeric compound ready to apply on joints for an effective waterproofing treatment. The compound can be used on a variety of surfaces such as concrete, asphalt, asbestos, metals, wood, terrazzo, and tile. It is a proven barrier to humidity borne salts
and atmospheric effects.
An essential finishing treatment for proper completion of waterproofing is correctly sealing construction joints, expansion joints, connection joints, cracks, and fissures on
concrete and other structures to ensure a 10 year guarantee. This can also be used to repair old or damaged joints.
Continuous sheets of high grade aluminum are fabricated and installed to protect the structure from moisture and the passage of water in areas such as joints.
Although not essential to a waterproofing system, however, they do increase longevity, and quality and ensure maximum compatibility to treat joints, ends, drainage outlets and supply within the system to ensure that it is watertight and correctly welded to the membrane at hand. We recommend this to all our clients and encourage the added investment in return for a safer system and protection for the structure.
Polyurethane-based elastic joint sealant is suitable for movement and connection joints for indoor and outdoor applications. The method and product could also be successfully used for sealing joints in civil construction, facades, balcony parapets, precast, windows, cladding, and other joints in metal, wood, or concrete structures.
An aluminum-rich bituminous liquid membrane is suitable to give any layer a solar reflective finish that ensures solar & weather protection of the under surfaces and effective stabilization of temperatures within the structure. The product can be used on metal, wood, concrete, or bituminous surfaces and will also help to rejuvenate old surfaces.
STRUCTURAL STRENGTHENING & TREATMENT
Moisture tolerant, thixotropic, structural adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use also for joint filling and crack sealing. Used to protect and in some cases correct structural problems & unforeseen failures.
Pultruded carbon fiber reinforced polymer laminates used for strengthening structures of various designs including but not limited to concrete, timber, masonry and steel. Used to protect and in some cases correct structural problems, unforeseen failure, along with after fire/flood treatment.
FLOORING
Two part, economic, colored epoxy resin. Suitable for use in hot and tropical climatic conditions. Applied to concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages, and loading ramps. Seal coat for broadcast systems, such as multi-story and underground car parks, maintenance hangars, and wet process areas, e.g. beverage
and food industry.
Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging properties in industrial flooring, Particularly suitable for car park decks, ramps, warehouses, etc. Suitable for use in a hot and tropical climate.